ADAS Calibration
In-house. Same visit. Done right — so the safety systems behind your windshield work exactly when you need them.
If your vehicle was built in the last decade, there's a good chance a camera behind your windshield is quietly running your lane departure warning, automatic emergency braking, adaptive cruise control, and collision alerts. These are Advanced Driver Assistance Systems — ADAS — and they depend on that camera being aligned to the millimeter.
When a windshield is replaced, that alignment is disturbed. Vehicle manufacturers — and most insurers — require ADAS recalibration after windshield replacement. Skip it, and your safety systems can warn you too late, brake when they shouldn't, or fail to activate at all.
Newburgh Auto Glass performs that calibration in our own shop at 2 Bridge Street, in the same visit as your windshield replacement. You don't get sent to a dealer, and you don't come back a second day.
Does Your Vehicle Need It?
The quickest check: sit in the driver's seat and look up at the back of your rear-view mirror. If there's a housing with a lens pointed through the glass, your vehicle has a forward-facing ADAS camera.
Lane departure warning, lane keeping assist, automatic emergency braking, forward collision alert, adaptive cruise control, traffic sign recognition, and automatic high beams.
Toyota, Honda, Subaru, Ford, Chevrolet, GMC, Ram, Jeep, Nissan, Hyundai, Kia, Mazda, Volkswagen, Audi, BMW, Mercedes-Benz, Volvo, and most commercial vans and light trucks.
After windshield replacement, after front-end collision work, after suspension or alignment changes that alter ride height, and any time a camera or radar module is removed or replaced.
In-house. Same visit. Done right.
Unlike shops that outsource calibration or send you to the dealer, Newburgh Auto Glass performs certified ADAS calibration in-house with professional calibration equipment.
Performed in our shop using manufacturer-specified targets, measured and positioned precisely for your vehicle.
Performed by road-testing your vehicle with a scan tool connected, letting the system relearn lane markings and road conditions.
Many vehicles require one or both. We'll tell you exactly what your vehicle needs — and in most cases windshield replacement and calibration happen in a single visit.
We Handle The Insurance, Too
ADAS calibration is typically covered when your windshield claim is covered. We work with all major insurance providers and handle the paperwork so you don't have to.
Operating delivery vans, work trucks, or heavy equipment with camera-based safety systems? We offer fleet windshield replacement with calibration built in — keeping your vehicles compliant and your drivers protected.
Request a Free Quote →
ADAS Calibration FAQs
Yes. Virtually every vehicle manufacturer requires recalibration after the windshield is removed and replaced, because the forward-facing camera mounts to the glass. Most insurance carriers require it as well.
Most calibrations take 45 minutes to a few hours depending on whether your vehicle needs static, dynamic, or both. In most cases we complete it the same visit as your windshield replacement.
Usually, yes — when the windshield replacement is covered, the required calibration is covered with it. We work directly with all major insurers and can walk you through your policy.
A camera that's off by even a few millimeters can misjudge distances by several feet at highway speed. Lane keeping, emergency braking, and collision warnings may trigger late, falsely, or not at all.
Static calibration is done in the shop with precisely positioned targets; dynamic calibration is done on the road with diagnostic equipment connected. Your vehicle's make and model determines which is required.
Yes, we calibrate cameras on cars, pickups, delivery vans, box trucks, and heavy equipment, and can build a calibration program for your whole fleet.
It depends on your vehicle and whether it needs static, dynamic, or both. When calibration is required as part of a covered windshield claim, it is normally covered along with the glass. Call us with your year, make, and model and we'll quote it before any work starts.
Yes. We regularly calibrate vehicles whose windshields were replaced elsewhere, including by mobile installers who don't carry calibration equipment. Bring it in and we'll scan it, calibrate it, and give you documentation.
Yes. Our shop is on Bridge Street in Newburgh and we regularly calibrate vehicles from New Windsor, Cornwall, Marlboro, Wallkill, Walden, Montgomery, Middletown, Goshen, Beacon, Fishkill, Wappingers Falls, and Poughkeepsie. Static calibration has to happen in the shop because it needs a level floor and precise target placement.
Where We Work
Our calibration bay is at 2 Bridge Street in Newburgh, NY — a level, controlled space with the clearance manufacturer targets require.
Drivers come to us from Newburgh, New Windsor, Cornwall, Cornwall-on-Hudson, Marlboro, Wallkill, Walden, Montgomery, Middletown, Goshen, Beacon, Fishkill, Wappingers Falls, and Poughkeepsie.
Drive away safe and road-ready — with your safety systems calibrated to the millimeter.
Work With Us →